Function:series HCD194E electric power monitoring meter has features of programmable measurement and display,digital communication,etc.It is widely used for measuring and analyzing electric quantity in power network,and has function of electric quantity measurement,electric energy metering,data acquisition and transmission.It is one of best instruments for electric power measurement, management and tesst for enterprises .the precision of this meter is 0.5 degree and conforms to IEC60687 standard.the meter has asynchronous semiduplex RS-485 interface and MODBUS protocol
1.Model and specification:
HCD194E-2S4: HCD194E-2S4:measure 3-phase voltage,3-phase current, active power,reactive power,frequency,power factor, active electric energy (absorb)and reactive electric energy (inductive).these data can be display by 3-row-4-digit LED and indicators by changing mode, i.e.b by press "→ " and "←" keys, the respective indicator wil light up when select the electric parameter. the active and reactive electric energy displayed by 8-digit LED, the first two rows display the electric parameter, the third row displays the unit, e.g. "0245, 23.67, Wh" means the active electric energy is 24523.67 Wn (i.e.24.5kWh) when the unit indicator does not light up. when display the frequency, the first row displays the unit (Hz), the second row displays the value. the display can switchover by presetting the "DISP" value, then "DISP"=0 the meter will automatically display circularly the voltage, current, power, electric energy and frequency.Note:For 3-phase-4wire system, the meter will display the phase voltage normally, and press"←" key can switch the display between phase voltage and line voltage. for 3-phase-3wire system, the meter will display the line voltage HCD194E-2S7: HCD194E-2S7: measure 4 quadrants electric energy:active electric energy (absorb and release), reactive electric energy (inductive and capacitive),2-row-6-digit LED to display active electric energy (inductive ) respectively.when press down the switch key , the meter will display active electric energy (capacitive ) for a period then turn back to display reactive electric energy (capacitive) or active electric energy (release)HCD194E-2S9: HCD194E-2S9: measure 3 current and 1 active electric energy, 3-row-4-digit LED to display current and 1-row-6-digit LED to display electric energy. the meter must connect the input voltage before measurement ; the display should be zero when the input voltage has not connected and electric energy canot accumulate. |
Measurement | display | Function | ||||
Content | Mode | Digital communication | Program control | Pulse output | ||
HCD194E-2S4 | All electric quantities in electric network | All | Auto or switchover | RS-485 | Yes | 2 paths |
HCD194E-2S7 | 4-quadrant electric energy | 4 electric parameters | Switchover | RS-485 | Yes | 2 paths |
HCD194E-2S9 | 3-phase current and active power | Current and active power | Fixed | RS-485 | Yes | 2 paths |
Dimension(unit:mm) Mount size:110X110 Hole size:110X111 Panel size:120X120 Mount method:mount on panel Dimension(unit:mm) Mount size:92X92 Hole size:92X100 Panel size:96X96 Mount method:mount on panel |
If you are interested in our products, please don’t be hesitated to contact us. Please send mail to tenka@wenbaele.com, or leave your message at the following form. We will contact you within 24 hours. Thank you for your enquiry.