Welcome to Shanghai Wenba Electric Co., Ltd.

LCD RM UPS 220V Home / UPS / LCD RM UPS 220V

LCD RM UPS 220V

KEY FEATURES


· Microprocessor Control Guarantees High Reliability
· Comprehensive Self-Protection Design
· Audible Alarm Mute
· Cold Start Function
· Auto Self-Testing System while Turning On UPS
· Wide Input Voltage Range
· Tower and Rack Mount Available

· 19" Rack Mount Available


Products Specification

MODEL   GR1KD GR1KDS GR2KDS GR2KDS GR3KD GR3KDS GR6KD GR6KDS
CAPACITY VA/W 1000VA/700W 2000VA/1400W 3000VA/2100W 6000VA/4200W
INPUT Phase Single Phase with Ground
Frequency Range 50Hz:46~54Hz
Power Factor >=0.97 >=0.98
Voltage Range Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%)
Line Low Transfer 160VAC/140VAC/120VAC/110VAC± 5VAC 176 ±3% VAC
Line Low Comeback 175VAC ± 5VAC 185 ± 3% VAC
Line High Transfer 300VAC± 5VAC 276 ± 3% VAC
Line High Comeback 285VAC± 5VAC 266 ± 3% VAC
OUTPUT Phase Single
Voltage 220VAC/230VAC/240VAC
Voltage Regulation ± 2% ± 1%
Frequency
( Synchronized Range)
46~54Hz
Frequency
( Battery Mode)
50 ± 0.2 Hz 50Hz ± 0.05Hz
Current Crest Ratio 3:1
Harmonic Distortion <3% THD
( Linear Load)
<6% THD
( Non-Linear Load)
<4% THD ( Linear Load)
<7% THD ( Non-Linear Load)
<2% THD (Linear Load)
<6% THD (Non-Linear Load)
Output Waveform Pure Sinewave
EFFICIENCY To AC Mode 85% 85% 85% > 88%
To Battery Mode 83% 83% 83% > 88%
BATTERY Battery Type 12V/7.2Ah Depending on the capacity of external batteries 12V/7.2Ah Depending on the capacity of external batteries 12V/7.2Ah Depending on the capacity of external batteries 12V/7.2AH Depending on the capacity of external batteries
Numbers of Batteries 3 8 8 20
Backup Time
(Full Load)
>5 minutes >9 minutes >5 minutes 8 minutes
Recharge Time 5 hours to 90% 5 hours to 90% 5 hours to 90% 7 hours to 90%
Charging Current (Max.) 1.0A 7A 1.0A 8A+/-1A 1.0A 8A+/-1A 2.0A 4.2A
Charging Voltage 41.1Vdc ± 0.6V 110Vdc ± 0.4V 274Vdc ± 1%V
External Battery type N/A 12V/7.2AH *6 N/A 12V/7.2AH *8 N/A 12V/7.2AH *8 N/A 12V/7.2AH *20
TRANSFER TIME AC to DC Zero
Inverter to Bypass 2.5ms (Typical ) Zero
Operation interface LED Indicator Normal (green),warning(yellow),Fault(red)
LCD Indicator Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set
AUDIBLE ALARM Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously Sounding
DIMENSION UPS Case D x W x H (mm) 400x145x220 460x192x340 570x260x717
Battery Case D x W x H N/A 400*145*220 N/A 460*192*340 N/A 460*192*340 570*260*717
WEIGHT Net Weight(kgs) 14(w / battery) 7 34.5(w / Battery) 15 35.5(W / Battery) 16 84(W / Battery) 35
ENVIRO
NMENT
Operating Environment 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing)
Noise Level <45dB @ 1 Meter 50dB @ 1 Meter <55dB @ 1 meter
INTERFACE Smart RS-232 Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, and MAC
SNMP (option) Power management from SNMP manager and web browser

SEND US A MESSAGE

If you are interested in our products, please don’t be hesitated to contact us. Please send mail to tenka@wenbaele.com, or leave your message at the following form. We will contact you within 24 hours. Thank you for your enquiry.