Welcome to Shanghai Wenba Electric Co., Ltd.

UPS 6KVA ~ 10KVA Home / UPS / UPS 6KVA ~ 10KVA

UPS 6KVA ~ 10KVA

APPLICATION


Servers, Data centers, Critical network devices, Sensitive electronic equipment, Telecom...


KEY FEATURES

lTrue online double conversion technology
Wide input voltage range
Zero transfer time
Protection against all types of power problems
No add-on CNTL unit required for parallel connection
Low initial investment and flexible for future expansion
Highest reliability and maximum performance for power sharing and redundancy
Equipped with Maintenance Bypass Switch
Smart RS232 and Intelligent slot interface
Sealed lead-acid, maintenance free battery


TECHNICAL SPECIFICATIONS

Model

G6KN G10KN

Rated Power

VA/W 6kVA/4.2kW 10kVA/7kW

Input

Nominal Voltage 220VAC
VoltageRange 176 ~ 276VAC
FrequencyRange 46 ~ 54Hz
Power Factor 0.98
Connection Hardwired

Output

Voltage 220VAC ±1%
Frequency 50Hz ±0.1% (Battery mode)
Waveform Sine Wave
Power factor 0.7
Voltage Distortion 2% under linear load
Overload Capability 105% ~ 130% for 10 min., ³130% for 1 min.
Current Crest Ratio 3:1 max.
Connection Hardwired

Battery

Type Sealed, Maintenance free, Lead-Acid (Panasonic)
Quantity 20 pieces
Back-up time (full load) 7 min 5 min
Recharge time 8 hrs to 90% of capacity after full load discharge

Transfer time

0 ms

Maintenance Bypass Switch

Yes

LED indicators

Status Load level/Battery level,Battery , Utility power, Inverter, Bypass, Overload, Fault

Audible alarm

Bypass Alarm beeps every two minutes
Battery discharge Alarm beeps every four seconds, every second if battery low
Overload Alarm beeps two for every second
Fault Alarm beeps continuously

Acoustic noise

At 1 meter distance £ 55 dBA

Communications

DB-9 Port RS232 serial interface
Intelligent Slot Options: WebPower, AS400 or WinPower CMC

ParallelPort

up to three units in parallel for power redundancy and load sharing

Environmental

Operating temperature 0 ~ 40°C
Operating humidity 20% ~ 90% non-condensing

Weight

Net (kg) 84 93

Dimensions

W x D x H (mm) 260 x 570 x 717

Model

G6KNS G10KNS

Rated Power

Volt-Amps/Watts (VA/W) 6kVA/4.2kW 10kVA/7kW

Input

Nominal Voltage 220VAC
VoltageRange 176 ~ 276VAC
FrequencyRange 46 ~ 54Hz
Power Factor 0.98
Connection Hardwired

Output

Voltage 220VAC ±1%
Frequency 50Hz ±0.1% (Battery mode)
Waveform Sine Wave
Power factor 0.7
Voltage Distortion 2% under linear load
Overload Capability 105% ~ 130% for 10 min., ³130% for 1 min.
Current Crest Ratio 3:1 max.
Connection Hardwired

Battery

Type Sealed, Maintenance free, Lead-Acid (Panasonic)
Nominal DC Voltage 240VDC
Back-up time Depends on the capacity of the external battery bank
Connection ExternalBattery Socket

Transfer time

0 ms

Maintenance Bypass Switch

Yes

LED indicators

Status Load level/Battery level,Battery , Utility power, Inverter, Bypass, Overload, Fault

Audible alarm

Bypass Alarm beeps every two minutes
Battery discharge Alarm beeps every four seconds, every second if battery low
Overload Alarm beeps two for every second
Fault Alarm beeps continuously

Acoustic noise

At 1 meter distance £ 55 dBA

Communications

DB-9 Port RS232 serial interface
Intelligent Slot Options: WebPower, AS400 or WinPower CMC

ParallelPort

up to three units in parallel for power redundancy and load sharing

Environmental

Operating temperature 0 ~ 40°C
Operating humidity 20% ~ 90% non-condensing

Weight

Net (kg) 35 38

Dimensions

W x D x H (mm) 260 x 570 x 717

SEND US A MESSAGE

If you are interested in our products, please don’t be hesitated to contact us. Please send mail to tenka@wenbaele.com, or leave your message at the following form. We will contact you within 24 hours. Thank you for your enquiry.