Welcome to Shanghai Wenba Electric Co., Ltd.

WB-200W Home / Switching Power Supply / WB-200W

WB-200W

·Universal AC input range

·Small volume,low weight,high efficiency

·Protections:short circuit/over load/Over voltage/Over temperature

·Built-in active PFC function, PF>0.95

·LED indicator for power on

·100% full load burn-in test

·2 Years warranty


Model

WB-200-5 WB-200-12 WB-200-15 WB-200-24

Output

DC voltage

5V 12V 15V 24V

Voltage tolerance

±1% ±1% ±1% ±1%

Rated current

35A 16.5A 13A 8.3A

Current range

0-35A 0-16.5A 0-13A 0-8.3A

Rated power

175W 198W 195W 199.2W

Ripple&Noise

150mVp-p 150mVp-p 150mVp-p 180mVp-p

DCvoltage ADJ.range

±10% ±10% ±10% ±10%

Setup,Rise Time

800ms,50ms,20ms/230VAC. 1600ms,50ms,20ms/115VAC

Input

Voltage range

90~263VAC,47~63Hz,125~370VDC

AC current

3A/115VAC 1.5A/230VAC

efficiency

80% 86% 86% 87%

Inrush current

Cold start 25A/115VAC ,40A/230VAC

Leakage current

<2mA/240VAC

Power factor (Typ.)

PF>0.95/230VAC,PF>0.98/115VAC at full load

Protection

Over load

110~135% rated output power
Protection type : Hiccup mode,recovers automatically after fault condition is removed

Over voltage

6.2~7.2V 15~17V 18~20V 30~32V
Protection type : Shut down o/p voltage, re-power on to recover

Over temperature

95℃±5℃ start over temperature(DETECT ON SURFACE OF power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down to 60℃±5℃

Environment

 

Working temp&humidity

-20℃~+60℃;20%~90%RH(Refer to "Deration Curve")

Storage temp&humidity

 

-40℃~+85℃;10%~95%RH non-condensing

Vibration

10~500Hz,2G 10min./1cycle,period for 60min,each along X,Y,Z axes

Safety

Withstand Voltage

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

Isolation resistance

I/P-O/P:I/P-FG,O/P-FG:100M Ohms/500VDC

EMC

Safety standard

Compliance UL1012 UL60950-1 CB(IEC60950-1)

EMC Emission

Compliance EN55022,EN55024,CLASS   B

Others

Dimension

199*99*48mm(L*W*H)

Packing

0.8kg/24pcs/10kg/0.034 Cubic meter


NOTE:

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

SEND US A MESSAGE

If you are interested in our products, please don’t be hesitated to contact us. Please send mail to tenka@wenbaele.com, or leave your message at the following form. We will contact you within 24 hours. Thank you for your enquiry.